Gigabyte GV-NX73G128D, Руководство пользователя

Страница: 28 / 44

GV-NX73G Series Graphics Accelerator - 22 -
English
„
nView allows you to connect separate displays to single
graphics card.
• nView Display mode: select your preferred nView display
modes here. Options: Single display/ Clone/ Horizontal
span/ Vertical span/ Dualview
• Primary/Secondary display: select a single display or
display pair. The selected display combination will appear
in the graphical representation below.
• Make this the primary display: Specifies that the display
corresponding to the icon you selected above is the
primary display.
• Click Apply to apply settings or click OK to save settings.
„ If TV is chosen as the display, you will need to select the
proper TV format. To do this, click "Device Settings" followed
by "Select TV format". Select the format for your television
and then click "Apply" followed by "OK".
"*" Only Single display mode is available when SLI mode is enabled.
nView Display properties*
Display
Matrix
Model GV-NX73G128D(-RH)
CRT+TV Yes
CRT+DVI Yes
DVI+TV Yes
Display
Matrix
Model GV-NX73G256D-RH
CRT+TV Yes
CRT+DVI Yes
DVI+TV Yes
Dual-Monitor Setup:
You can set the display to output from two monitors on the nView Display Settings page.
The GV-NX73G128D/GV-NX73G128D-RH/GV-NX73G256D-RH supports the following modes.
Clone Mode
(1) Clone Mode:
Clone mode indicates that both displays in the
display pair show images of the same desktop.
Select
Clone from the nView Display Mode list
and click Apply .