Hardware Installation
- 7 -
English
2. Replace the screw to fasten the card in place,
and replace the computer cover.
3. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
You are now ready to proceed with the installation of the graphics card driver. Please
refer to next chapter for detailed instructions.
To TV/VCR/VIVO
To VGA Monitor
To Flat Panel Display
Warning!
When installing the graphics card, do
not push down the heat pipe. This
may displace the heat pipe and cause
bad contact between the GPU and
thermal pad as well as affect the heat
dissipation. To avoid system
instability, do not touch the graphics
card when it is runnnig .
The two central heatsink fins on the
back of the graphics card can be
used to fasten the patented
GIGABYTE 3D Plug Cooler (optional
device) for heat dissipation for the
VGA chipset.
Slide the fan arm onto
the two central heatsink fins until it fits
securely into place.
Содержание GV-NX66256DP2
Страница 1: ...Aug 24 2005 VGA Card GV NX66256DP2...
Страница 2: ...VGA Card Aug 24 2005 GV NX66256DP2...
Страница 35: ...Appendix 33 English...
Страница 36: ...GV NX66256DP2 Graphics Accelerator 34 English...