Gigabyte GN-GSV2401S, Руководство пользователя

Страница: 15 / 43

11
3.1 Local Console Management
You can manage the Switch locally using HyperTerminal; simply connect the
Switch to a PC or workstation through the serial port.
The serial port settings need to be configured before connecting to the Switch. In
order to change the settings of your port, run the
HyperTerminal program. This
program comes packaged with Windows, but it may not be installed on your
computer. It should be located as is shown below (varies according to operating
systems). If it is not, consult your Windows’ documentation for instructions on
installing HyperTerminal.
To enable communications with the Switch, the serial cable must be connected
between the Switch and the computer.
Make sure both the Switch and the computer are powered down. Next, plug one
end of the serial cable into the console port of the GN-GSV2401S and the other
end of the serial cable into the COM1 port on the back panel of your computer.
Now start your computer and turn on the GN-GSV2401S power.
After the power is turned on, please select
All Programs from the Start menu.
Then choose Accessories , followed by Communications . In the
Communications sub-menu select HyperTerminal .
Figure 3.1 HyperTerminal Path