Gigabyte GN-GSV2401S, Руководство пользователя

Страница: 11 / 43

7
2.3 The Front Panel
The front panel of the Gigabyte Switching hub is shown below.
Figure 2.1 Overview of Front Panel
Reset button
Pressing the reset button will reboot the entire system.
Gigabit Port
The 2 gigabit ports are used to connect to a PC or can be used to expand your
network by simply connecting to a 1000 Mbps switch or Hub.
Ethernet Port
There are 24 Fast Ethernet ports, each capable of being connected to network
devices, such as PCs and printer servers, at 10/100 Mbps.
LEDs
„ POWER
On When the Power LED light is on, the GN-GSV2401S is receiving power.
Off When the Power LED light is off, the power cord is improperly connected.
Ports 1-24 LEDs
Port LED indicators shows the operating status of each port.
„ LNK/ACT/SPEED LED
Every port has a Link/Activity/Speed LED.
Green light The connection speed is operating at 100Mbps.
Orange light The connection speed is operating at 10Mbps.
Blinking
The port is transmitting or receiving data on the 10/100Mbps
Ethetnet network.
A steady light (link state) indicates that the port has good linkage to its
associated device. If the port is connected but the Link/Activity/Speed LED
does not light up, please check the following items:
1. The switching hub and the connected devices’ power are on.
2. The port’s cable is firmly seated in its connectors in the switching hub and in
the associated device.
3. The connecting cable is functional and the correct type.
4. The connecting device, including any network adapter, is functioning
properly.