Gigabyte GN-GSV2401M, Руководство пользователя

Страница: 66 / 132

61
3.3.2.2 Trunk Configuration
The Port Trunk Configuration Menu is displayed after selecting it from the Switch
Static Configuration menu. Settings for each port can be adjusted in this menu.
Port trunk groups are used to combine a number of ports together to make a
single high-bandwidth data pipeline.
Select Trunk Configuration from the Main Menu and press enter.
Changing Port Trunking settings:
To access each setting use the “Tab” key to select the desired port you wish to
customize. Enter the desired settings and then “<save>” the new settings.
The GN-GSV2401M can utilize up to 7 trunk groups. With up to 4 ports in each
group, a potential bit rate of 800 Mbps can be achieved.
Note:
1. If the two Gigabit Ethernet ports are used as a trunk group and either port is
disconnected, packets intended for the disconnected port will be dropped.
2. If VLAN group exist, all of the members of static trunk group must be in same
VLAN group.