11
GB-AEDTK
Setting Up Your PC
This section describes how to set up your computer and make adjustments to the monitor.
Preparing To Setup Your PC
To protect the computer and monitor, before setting up your computer you should:
•
Find a flat open area on your desk to position your computer.
•
Place a soft item like the computer packaging bag on the desk for padding.
It is suggested to install your computer in a space that allows for airflow as restricting
the airflow may cause overheating which could impact the performance of your com
-
puter.
1.
Gently lay the screen face down on a flat clean padded surface.
2.
Pull the computer stand till it reaches the first detent stop. (approximately 10° apart from the rear of the
computer).
Please ensure the computer stand has been pulled up to the first detent position, so that
your computer may stand firm and upright.
3. Carefully lift the computer and adjust the angle of the screen.
