&
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
&
Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to
Enabled
.
Auto
lets the BIOS automatically configure this
setting. (Default: Auto)
&
Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
&
RC6(Render Standby)
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
consumption. (Default: Enabled)
&
Platform Power Management
Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
&
PEG ASPM
Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is
configurable only when
Platform Power Management
is set to
Enabled
. (Default: Enabled)
&
PCH ASPM
Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus. This item
is configurable only when
Platform Power Management
is set to
Enabled
. (Default: Enabled)
&
DMI Link ASPM Control
Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. This item is
configurable only when
Platform Power Management
is set to
Enabled
. (Default: Enabled)
- 34 -
