Gigabyte GA-P55-UD4, Руководство пользователя

Страница: 19 / 128

- 19 - Hardware Installation
1-6 Setup of ATI CrossFireX
™
/NVIDIA SLI Configuration
A. System Requirements
- Windows Vista or Windows XP operating system
- A CrossFireX/SLI-supported motherboard with two PCI Express x16 slots and correct driver
- Two CrossFireX/SLI-ready graphics cards of identical brand and chip and correct driver
- Two CrossFire
(Note)
/SLI bridge connectors
- A power supply with sufficient power is recommended (Refer to the manual of your graphics cards for
the power requirement)
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install two CrossFireX/SLI graphics cards on the
PCI Express x16 slots.
Step 2:
Insert the CrossFire
(Note)
/SLI bridge connectors in the CrossFireX/SLI gold edge connectors on top of the two
cards.
Step 3:
Plug the display cable into the graphics card on the PCIEX16 slot.
C. Configuring the Graphics Card Driver
C-1. To Enable CrossFireX Function
After installing the graphics card driver in the operating system, go to
the
ATI Catalyst Control Center . Browse to the CrossFireX menu
and ensure the Enable CrossFireX
™
check box is selected.
Procedure and driver screen for enabling CrossFireX/SLI technology may differ by graphics cards.
Refer to the manual that came with your graphics cards for more information about enabling Cross-
FireX/SLI technology.
C-2. To Enable SLI Function
After installing the graphics card driver in the operating system, go
to the
NVIDIA Control Panel . Browse to the Set SLI Con fi guration
screen and ensure the Enable SLI technology check box is se-
lected.
(Note) The bridge connectors may be needed or not depending on your graphics cards.