Gigabyte GA-P35-DS3, Руководство пользователя

Страница: 80 / 96

GA-P35-DS3/S3 Motherboard - 80 -
English
Step 3:
When Setup correctly recognizes the GIGABYTE SATA2 SATA RAID/AHCI driver in the floppy disk, a
controller menu similar to Figure 3 below will appear. Use the arrow keys to select one of the items
displayed and press <Enter>. If you set the
Onboard SATA/IDE Ctrl Mode item in BIOS Setup to RAID
mode, select GIGABYTE GBB363 RAID Controller (Windows 2K/XP/2003) . (Select GIGABYTE
GBB363 AHCI Controller (Windows 2K/XP/2003) for AHCI mode.)
Figure 3
Figure 4
When the screen as shown below appears, press <Enter> to continue the driver installation from
the floppy disk. The driver installation will be finished in about one minute.
Windows Setup
S=Specify Additional Device ENTER=Continue F3=Exit
Setup will load support for the following mass storage device(s):
GIGABYTE GBB363 RAID Controller (Windows 2K/XP/2003)
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
Windows Setup
ENTER=Select F3=Exit
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
GIGABYTE GBB363 RAID Controller (Windows 2K/XP/2003)
GIGABYTE GBB363 AHCI Controller (Windows 2K/XP/2003)
GIGABYTE GBB360 AHCI Controller (Windows 2K/XP/2003)
GIGABYTE GBB362 RAID Controller (Windows 2K/XP/2003)
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA RAID/AHCI driver again from the motherboard driver disk.