Gigabyte GA-MA785GMT-UD2H Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 104

background image

Unique Features

- 68 -

4-2 BIOS Update Utilities

GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash

™

and @BIOS

™

. GIGABYTE

Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS
mode. Additionally, this motherboard features the DualBIOS

™

design, which enhances protection for the

safety and stability of your computer by adding one more physical BIOS chip.

What is DualBIOS

™

?

Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and
a backup BIOS. Normally, the system works on the main BIOS. However, if the

main BIOS is corrupted or damaged, the backup BIOS will take over on the next system boot and copy the
BIOS file to the main BIOS to ensure normal system operation. For the sake of system safety, users cannot
update the backup BIOS manually.

What is Q-Flash

™

?

With Q-Flash you can update the system BIOS without having to enter operating
systems like MS-DOS or Window first. Embedded in the BIOS, the Q-Flash tool

frees you from the hassles of going through complicated BIOS flashing process.

What is @BIOS

™

?

@BIOS allows you to update the system BIOS while in the Windows environ-
ment. @BIOS will download the latest BIOS file from the nearest @BIOS server

site and update the BIOS.

4-2-1 Updating the BIOS with the Q-Flash Utility

A. Before You Begin

1. From GIGABYTE's website, download the latest compressed BIOS update file that matches your moth-

erboard model.

2. Extract the file and save the new BIOS file (e.g. 785GPMT2.F1) to your floppy disk, USB flash drive, or

hard drive. Note: The USB flash drive or hard drive must use FAT32/16/12 file system.

3. Restart the system. During the POST, press the <End> key to enter Q-Flash. Note: You can access

Q-Flash by either pressing the <End> key during the POST or pressing the <F8> key in BIOS Setup.
However, if the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to
an independent IDE/SATA controller, use the <End> key during the POST to access Q-Flash.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2009, Award Software, Inc.

GA-MA785GPMT-UD2H E3c

.

.

.

.

<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash

06/05/2009-RS785-SB710-7A66BG03C-00

Because BIOS flashing is potentially risky, please do it with caution. Inadequate BIOS flashing may
result in system malfunction.

«
...
66
67
68
69
70
...
»

Содержание GA-MA785GMT-UD2H









































































































Отзывы:

Нет отзывов

Похожие инструкции для GA-MA785GMT-UD2H

Бренд: Texas Instruments Страницы: 47

MITX-DNV0 Series

Бренд: Quanmax Страницы: 84

Бренд: JETWAY Страницы: 48

Бренд: ASROCK Страницы: 160

Бренд: Gigabyte Страницы: 87

Бренд: Intel Страницы: 12

Бренд: IBASE Technology Страницы: 64

B85M-P32 series

Бренд: MSI Страницы: 186

Бренд: BESTEK Страницы: 45

Бренд: JS Automation Страницы: 18

Бренд: Microchip Technology Страницы: 44

Бренд: WynMax Страницы: 68

Бренд: JETWAY Страницы: 57

GA-Z97X-Gaming G1

Бренд: Gigabyte Страницы: 136

Бренд: Gigabyte Страницы: 38

Бренд: ASROCK Страницы: 2

Бренд: ASROCK Страницы: 61

Бренд: ComNav Technology Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды