background image

Copyright

©

 2009 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE. 
Changes to the specifications and features in this manual may be made by GIGABYTE with-
out prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or  
published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classifications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:

 

  For quick set-up of the product, read the Quick Installation Guide included with the product.

 

  For detailed product information, carefully read the User's Manual.

 

  For instructions on how to use GIGABYTE's unique features, read or download the information  

 

 

on/from the Support&Downloads\Motherboard\Technology Guide page on our website. 

For product-related information, check on our website at: 
http://www.gigabyte.com.tw 

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" 
means the revision of the motherboard is 1.0. Check your motherboard revision before updating 
motherboard BIOS, drivers, or when looking for technical information.

Example:

Содержание GA-MA785GMT-UD2H









































































































Отзывы: