Gigabyte GA-M52L-S3P, Руководство пользователя

Страница: 74 / 96

Appendix - 74 -
Rebuilding an Array:
Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies
only to fault-tolerant arrays such as RAID 1. To replace the old drive, make sure to use a new drive of equal
or greater capacity. The procedures below assume a new drive is added to replace a failed drive to rebuild a
RAID 1 array.
Launch the NVIDIA Control Panel from All Programs in the Start Menu.
Step 1:
In NVIDIA Control Panel, click
Rebuild array un-
der Storage in the Select a Task pane.
Step 2:
When the
NVIDIA Rebuild Array Wizard ap-
pears, click Next .
Step 3:
Select the array to rebuild and click
Next .
Step 4:
Select a drive to add to the array and click
Next .
Step 5:
Click
Finish to start the rebuilding process.
Step 6:
The rebuilding progress is displayed in the
View
Storage Configuration sub-menu.