Gigabyte GA-M52L-S3P, Руководство пользователя

Страница: 22 / 96

Hardware Installation - 22 -
3/4/5) CPU_FAN/SYS_FAN/PWR_FAN (Fan Headers)
The motherboard has a 4-pin CPU fan header (CPU_FAN), a 3-pin system fan header (SYS_FAN), and
a 3-pin power fan header (PWR_FAN). Most fan headers possess a foolproof insertion design. When
connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the
ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan
with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be
installed inside the chassis.
CPU_FAN:
Pin No. Definition
1 GND
2 +12V / Speed Control
3 Sense
4 Speed Control
CPU_FAN
DEBUG
PORT
G.QBOFM
1
•
Be sure to connect fan cables to the fan headers to prevent your CPU and system from over-
heating. Overheating may result in damage to the CPU or the system may hang.
•
These fan headers are not configuration jumper blocks. Do not place a jumper cap on the
headers.
6) FDD (Floppy Disk Drive Connector)
This connector is used to connect a floppy disk drive. The types of floppy disk drives supported are:
360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB. Before connecting a floppy disk drive, be sure to locate
pin 1 of the connector and the floppy disk drive cable. The pin 1 of the cable is typically designated by
a stripe of different color. For purchasing the optional floppy disk drive cable, please contact the local
dealer.
SYS_FAN:
Pin No. Definition
1 GND
2 +12V / Speed Control
3 Sense
1
2
33
34
PWR_FAN:
Pin No. Definition
1 GND
2 +12V
3 Sense
SYS_FAN
1
PWR_FAN
1