Gigabyte GA-H77N-WIFI Скачать руководство пользователя страница 20

Страница: 20 / 108

Hardware Installation

- 20 -

The audio jacks can be reconfigured to perform different functions via the audio software.

If you install a Side Speaker, you need to retask other audio jack to be Side Speaker out.

Only microphones still MUST be connected to the default Mic in jack.

Refer to the instructions on setting up a 2/4/5.1/7.1-channel audio configuration in Chapter 5,

"Configuring 2/4/5.1/7.1-Channel Audio."

•

When removing the cable connected to a back panel connector, first remove the cable from your

device and then remove it from the motherboard.

•

When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent

an electrical short inside the cable connector.

Activity LED

Connection/

Speed LED

LAN Port

Connection/Speed LED:

State

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

Activity LED:

State

Description

Blinking

Data transmission or receiving is occurring

Off

No data transmission or receiving is occurring

DVI-I Port

The DVI-I port conforms to the DVI-I specification and supports a maximum resolution of 1920x1200 (the

actual resolutions supported depend on the monitor being used).

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB

keyboard/mouse, USB printer, USB flash drive and etc.

Center/Subwoofer Speaker Out Jack (Orange)

Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.

Rear Speaker Out Jack (Black)

Use this audio jack to connect rear speakers in a 4/5.1/7.1-channel audio configuration.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

Line In Jack (Blue)

The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used

to connect front speakers in a 4/5.1/7.1-channel audio configuration.

Mic In Jack (Pink)

The default Mic in jack. Microphones must be connected to this jack.

Содержание GA-H77N-WIFI













































































































Результаты поиска

Содержание GA-H77N-WIFI

Отзывы:

Бренды по названию

Популярные бренды

Gigabyte GA-H77N-WIFI, Руководство пользователя

Результаты поиска

Содержание GA-H77N-WIFI

Отзывы:

Бренды по названию

Популярные бренды