Gigabyte GA-965P-DS3P, Руководство пользователя

Страница: 68 / 96

GA-965P-DS3P Motherboard - 68 -
English
(3) Configuring RAID set in RAID BIOS
Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if
you do not want to create RAID.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message
which says "Press <Ctrl-I> to enter Configuration utility" (Figure 3). Press CTRL+ I to enter the RAID
BIOS setup utility.
Figure 3
Step 2:
After you press CTRL+ I, the
Create RAID Volume screen will appear (Figure 4).
Create RAID Volume
If you want to create RAID array, select Create RAID Volume in Main Menu and press ENTER.
Figure 4
Intel(R) Matrix Storage Manager option ROM V6.0.0.1022 ICH8R wRAID5
Copyright(C) 2003-06 Intel Corporation. All Rights Reversed.
[ MAIN MENU ]
1.Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION ]
RAID Volumes :
None Defined.
Physical Disks :
Port
Driver Model Serial # Size Type/Status(Vol ID)
0 ST3120026AS 3JT354CP 111.7GB Non-RAID Disk
1 ST3120026AS 3JT329JX 111.7GB Non-RAID Disk
[ ]-Select [ESC]-Exit [ENTER]-Select Menu
Intel(R) Matrix Storage Manager option ROM V6.0.0.1022 ICH8R wRAID5
Copyright(C) 2003-06 Intel Corporation. All Rights Reversed.
RAID Volumes :
None Defined.
Physical Disks :
Port
Driver Model Serial # Size Type/Status(Vol ID)
0 ST3120026AS 3JT354CP 111.7GB Non-RAID Disk
1 ST3120026AS 3JT329JX 111.7GB Non-RAID Disk
Press <CTRL - I> to enter Configuration Utility