Gigabyte GA-8IPE1000 Pro, Руководство пользователя

Страница: 30 / 112

- 26 - GA-8IPE1000 Series Motherboard
English
12) F_PANEL (2x10 pins connector)
Please connect the power LED, PC peaker, reset switch and power switch etc of your chassis front panel to
the F_PANEL connector according to the pin assignment above.
HD (IDE Hard Disk Active LED) Pin 1: LED anode(+)
(Blue) Pin 2: LED cathode(-)
SPEAK (Speaker Connector) Pin 1: VCC(+)
(Amber) Pin 2- Pin 3: NC
Pin 4: Data(-)
RES (Reset Switch) Open: Normal Operation
(Green) Close: Reset Hardware System
PW (Soft Power Connector) Open: Normal Operation
(Red) Close: Power On/Off
MSG(Message LED/Power/ Pin 1: LED anode(+)
Sleep LED)(Yellow) Pin 2: LED cathode(-)
NC( Purple) NC
11) 2X_DET
When an AGP 2X (3.3V) card is installed the 2X_DET will light up, indicating a nonsupported graphics
card is inserted. Informing users that system might not boot up normally due to AGP 2X (3.3V) is not
supported by the chipset.
+
-
SPEAK-
SPEAK+
20
Speaker
Connector
1
19
IDE Hard Di sk
Active L ED
Reset Swi tch
2
1
Soft Po wer
Connector
1 MSG+
MSG-
Me ssa g e LED/Po we r /
Sleep LED
PW -
PW +
1
HD+
HD-
1 RES+
RES-
NC
1