Gigabyte GA-8I945GME Скачать руководство пользователя | Manualshive

Страница: 9 / 80

background image

Hardware Installation

- 9 -

English

1-1

Considerations Prior to Installation

Preparing Your Computer

The motherboard contains numerous delicate electronic circuits and components which can
become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please
follow the instructions below:
1. Please turn off the computer and unplug its power cord.
2. When handling the motherboard, avoid touching any metal leads or connectors.
3. It is best to wear an electrostatic discharge (ESD) cuff when handling electronic components

(CPU, RAM).

4. Prior to installing the electronic components, please have these items on top of an antistatic pad or

within a electrostatic shielding container.

5. Please verify that the power supply is switched off before unplugging the power supply connector

from the motherboard.

Installation Notices

1. Prior to installation, please do not remove the stickers on the motherboard. These stickers are required

for warranty validation.

2. Prior to the installation of the motherboard or any hardware, please first carefully read the information

in the provided manual.

3. Before using the product, please verify that all cables and power connectors are connected.
4. To prevent damage to the motherboard, please do not allow screws to come in contact with the

motherboard circuit or its components.

5. Please make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

6. Please do not place the computer system on an uneven surface.
7. Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

8. If you are uncertain about any installation steps or have a problem related to the use of the product,

please consult a certified computer technician.

Instances of Non-Warranty

1. Damage due to natural disaster, accident or human cause.
2. Damage as a result of violating the conditions recommended in the user manual.
3. Damage due to improper installation.
4. Damage due to use of uncertified components.
5. Damage due to use exceeding the permitted parameters.
6. Product determined to be an unofficial Gigabyte product.

Chapter 1 Hardware Installation

«
...
7
8
9
10
11
...
»

Содержание GA-8I945GME

















































































Отзывы:

Нет отзывов

Похожие инструкции для GA-8I945GME

Бренд: Yamaha Страницы: 497

Бренд: Panasonic Страницы: 35

Бренд: Intel Страницы: 48

Бренд: NXP Semiconductors Страницы: 6

Бренд: ASROCK Страницы: 138

Бренд: JETWAY Страницы: 48

Бренд: Honda Страницы: 692

Бренд: Quick Страницы: 28

Бренд: Supermicro Страницы: 127

P5B PRO - QUICK

Бренд: ASROCK Страницы: 48

Бренд: ASROCK Страницы: 125

Бренд: Asus Страницы: 50

Бренд: Asus Страницы: 58

Бренд: Asus Страницы: 92

Бренд: Asus Страницы: 92

Бренд: Asus Страницы: 77

Бренд: Asus Страницы: 101

Бренд: Asus Страницы: 110

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды