Gigabyte GA-870A-USB3L, Руководство пользователя

Страница: 29 / 96

- 29 - Hardware Installation
15) CLR_CMOS (Clearing CMOS Jumper)
Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the
CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to tem-
porarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds.
• Always turn off your computer and unplug the power cord from the power outlet before clear-
ing the CMOS values.
•
After clearing the CMOS values and before turning on your computer, be sure to remove the
jumper cap from the jumper. Failure to do so may cause damage to the motherboard.
•
After system restart, go to BIOS Setup to load factory defaults (select Load Optimized De-
faults ) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup, " for BIOS
configurations).
Open: Normal
Short: Clear CMOS Values