Gigabyte G492-PD0 Скачать руководство пользователя страница 30

Страница: 30 / 93

- 30 -

System Hardware Installation

3-7 Installing the Hard Disk Drive

Read the following guidelines before you begin to install the hard disk drive:
• Take note of the drive tray orientation before sliding it out.

• The tray will not fit back into the bay if inserted incorrectly.

• Make sure that the hard disk drive is connected to the hard disk drive connector on the

backplane.

Follow these instructions to install a 2.5" hard disk drive:

1. Press the release button.

2. Extend the locking lever.

3. Pull the locking lever in the direction indicated to remove the HDD tray.

4. Align the hard disk drive with the positioning stud on the HDD tray.

5. Slide the hard disk drive into the HDD tray.

6. Reinsert the HDD tray into the slot and close the locking lever.

Содержание G492-PD0






























































































Результаты поиска

Содержание G492-PD0

Отзывы:

Похожие инструкции для G492-PD0

Бренды по названию

Популярные бренды

Gigabyte G492-PD0, Руководство пользователя

Результаты поиска

Содержание G492-PD0

Отзывы:

Похожие инструкции для G492-PD0

Бренды по названию

Популярные бренды