Gigabyte G482-Z50 Скачать руководство пользователя страница 2

Страница: 2 / 153

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classifications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:



User Manual: detailed information & steps about the installation, configuration and use this

product (motherboard), covering hardware, BIOS and BMC firmware.



Service Guide: detailed information & steps about the installation, configuration and use of

this product (server barebones), covering hardware & BIOS



Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation

purposes

Please see the support section of the online product page to check the current availability of these
documents

For More Information

For related product specifications, the latest firmware and software, and related information, please visit

our website at:

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal at:

http://reseller.b2b.gigabyte.com

For further information & technical assistance, please contact your GIGABYTE sales representative.

You may also message GIGABYTE server directly by email, Facebook or twitter.

Email:

[email protected]

Facebook:

https://www.facebook.com/gigabyteserver

Twitter:

https://twitter.com/GIGABYTEServer

Содержание G482-Z50


























































































































































Результаты поиска

Содержание G482-Z50

Отзывы:

Gigabyte G482-Z50, Руководство пользователя, Страница: 2 / 153

Результаты поиска

Содержание G482-Z50

Отзывы: