Gigabyte G481-S80 Скачать руководство пользователя страница 94

Страница: 94 / 124

BIOS Setup

- 94 -

Parameter

Description

PCH SATA Configuration

(continued)

Port 0/1/2/3/4/5/6/7

– Enable/Disable Port 0/1/2/3/4/5/6/7 device.

– Options available: Enable/Disable. Default setting is

Enable

Hot Plug (for Port 0/1/2/3/4/5/6/7)

(Note 2)

– Enable/Disable HDD Hot-Plug function.

– Options available: Enable/Disable. Default setting is

Disable

Spin Up Device (for Port 0/1/2/3/4/5/6/7)

(Note 2)

– On an edge detect from 0 to 1, the PCH starts a COM reset

initialization to the device.

– Options available: Enable/Disable. Default setting is

Disable

PCH sSATA Configuration

sSATA Controller

– Enable/Disable sSATA controller.

– Options available: Enable/Disable. Default setting is

Enable

Configure sSATA as

–

Configures on chip SATA type.

– AHCI Mode: When set to AHCI, the SATA controller enables its

AHCI functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.

– RAID Mode: When set to RAID, the SATA controller enables both its

RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.

– Options available: AHCI/RAID. Default setting is

AHCI

Alternate Device ID on RAID

(Note 1)

– Enable/Disable Alternate Device ID on RAID mode.

– Options available: Enable/Disable. Default setting is

Disabled

–

Please note that this option appears when HDD is in RAID Mode.

sSATA Port 0/1/2/3/4/5

–

The category identifies sSATA hard drives that are installed in the

computer. System will automatically detect HDD type.

Port 0/1/2/3/4/5

– Enable/Disable Port 0/1/2/3/4/5 device.

– Options available: Enable/Disable. Default setting is

Enable

Hot Plug (for Port 0/1/2/3/4/5)

(Note 2)

– Enable/Disable HDD Hot-Plug function.

– Options available: Enable/Disable. Default setting is

Disable

Spin Up Device (for Port 0/1/2/3/4/5)

(Note 2)

– On an edge detect from 0 to 1, the PCH starts a COM reset

initialization to the device.

– Options available: Enable/Disable. Default setting is

Disabled

(Note 1) Only appears when HDD sets to

RAID

Mode.

(Note 2) Only Supported when HDD is in

AHCI

RAID

Mode.

Содержание G481-S80





























































































































Результаты поиска

Содержание G481-S80

Отзывы:

Gigabyte G481-S80, Руководство пользователя, Страница: 94 / 124

Результаты поиска

Содержание G481-S80

Отзывы: