Gigabyte G481-S80, Руководство пользователя, Страница: 21 / 124

- 21 - System Appearance
2-6 Power Supply Unit (PSU) LED
PSU LED
Color Status Description
Off -- No AC power to all power supplies
Green On +12V output ON and OK
Green
Blinking
0.5Hz
AC present / Only +12VSB on (PS off) or PSU in Smart Standby Mode
Green
Blinking
2Hz
Power supply firmware update
Amber On
AC cord unplugged / AC power lost but a second power supply in parallel
still having AC input power
Power supply critical events that cause a shutdown, such as: OTP,
OCP, UVP, OVP and fan failure
Amber
Blinking
0.5Hz
Power supply warning events where the power supply continues to
operate, such as: high temperature, high power, high current, slot fan
2-7 Hard Disk Drive LEDs
LED#1
LED#2
RAID SKU
HDD Fault Locate
HDD
Access
HDD Present
(No Access)
No RAID configuration
(via HBA, PCH)
RAID configuration
(via HW RAID Card or
SW RAID Card)
Disk LED
(LED on
Back Panel)
Amber
Removed HDD Slot
(LED on Back Panel)
Disk LED
Removed HDD Slot
Green ON(*1) OFF BLINK (*2)
BLINK (*2)
OFF
OFF
OFF
ON
OFF
ON(*1)
OFF
OFF
ON
OFF
ON
(Low Speed: 2 Hz)
(*3)
(*3)
OFF
OFF
--
--
Green
Amber
Green
ON(*1) OFF --
--
--
--
--
Green
OFF OFF --
Amber
Amber OFF
OFF
Rebuilding
OFF
LED1
LED 2 HDD Present No HDD
Green
ON
OFF
NOTE:
*1: Depends on HBA/Utility Spec.
*2: Blink cycle depends on HDD's activity signal.
*3: If HDD is pulled out during rebuilding, the disk status of this HDD is regarded as faulty.