G-MAX
TM
Micro ATX Series User’s Manual
P. E6
Install fan on top of CPU
Click fan lock on
the pin at sides of
CPU socket.
CPU Pin
Lever
Ŝ
CPU (For Intel
Tualatin processors)
In this section you will find the gist of CPU installation.
1.Insert the CPU on the CPU socket. Before installation, lift up the lever and align the
cut of the CPU with the marking on the socket.
2.Pull down the lever to lock the CPU on the socket after installation. Put CPU cooler
on retention module and make sure to keep the heat sink tight against the CPU to
obtain the best cooling result. Lock the cooler on retention module.
3. Apply the thermal compound to one side of the template, and ensure the compound
is spread evenly across the template and repeat if necessary.
4. Connect fan power connector to the CPU FAN connector on the motherboard.
Set CPU clock frequency from BIOS Setup, see Motherboard Manual for details.
For AMD Athlon
TM
and AMD Duron
TM
processors, the installation method will be similar
to Intel
Pentium
Ƿ
and Intel
Celeron
processors
