background image

G-MAX

TM 

FB  Series User's Manual

10

English

VI.  System Installation and User's Guide

Introduction of the Functions on the Front Panel

 Remarks

1.It is recommended to use a high-quality optical disk to avoid the risk of broken disks during the

operation of the high-speed optical disk drive.

2.Some of the items labeled with "*" may be different from the hardware specifications listed in this

manual, and such items are based on the actual shipment.

3.If you want to obtain the most updated information of the drivers, please link to the following

website:
http://www.gigabyte.com.tw/products/plat_index.htm

Cautions for Safety

1.There is a risk of explosion if the Lithium battery of the system is not installed properly.  Therefore,

make sure you are using the same branded battery or equivalent one recommended by the
manufacturer when replacing the batteries.  Follow the instructions given by the manufacturer to
handle the disposed batteries.

2.When the users install a modem card on their own, please pay attention to the following:

I. Please avoid using the telephone wire smaller than that of the No. 26 AWG to prevent fire

accidents.

II. When the modem card is installed or uninstalled, please unplug the telephone line from the

socket.

CD-ROM Tray

CD-ROM Button

Floppy Button

Floppy LED

Floppy

Power Button

HDD LED

*1394 Port

Audio Output
MIC Port

*SPDIF Port

USB Port

*Card Reader

*Card Reader LED

*Card Reader Button

Power  LED

Keyboard Port (PS/2)

Power Socket

Mouse Port (PS/2)

COM Port

Audio Out

*VGA / COM Port

Audio In

MIC In

USB Port

LPT Port

LAN Port

Game Port

Voltage Switch

*1394 

Port

Introduction to the Functions on the Rear Panel

Содержание G-MAX FB


















Отзывы: