Replacing the Battery
The battery will gradually weaken over time. We recommend that you replace your battery when you
notice a significant decrease of battery capacity.
To change the battery pack, follow the steps below:
1. Turn off the computer.
2. Close the lid and flip the computer over.
3. Slide the battery latch. Continue to hold it until the battery is removed.
4. Make sure the replacement battery is properly oriented before inserting it into the battery
compartment.
Note: The battery can not be charged to 100% when remaining battery is no less than 95%. It is
based on the supplier’s advice, and to extend charging frequency and battery life.
Maintenance of the AC Adapter
*Do not connect the adapter to any other device.
*Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord
and keep cables away from all traffic.
*When unplugging the power cord, do not pull on the cord itself but on the plug instead.
*If you are using an extension cord, make sure that the devices plugged onto the cord do not exceed
its total capacity. Furthermore, the devices plugged into the electrical outlet shall not exceed the
fuse’s total ampere rating.
*Please verify power voltage before connecting the electrical cord to the power outlet. If you are
uncertain of its power specification, please consult with your local vendors or power company for
more details.
1.14 Connecting the AC Adapter
The AC adapter converts AC power to DC power and reduces the voltage supplied to the computer.
It can automatically adjust to any voltage from 100 to 240 volts and outputs power at 12V, (12V, 3.0A
for M1028), allowing you to use your M1028 CafeBook computer in almost any region.
CAUTION: Use only the AC adapter and the power cord we recommend. Using the wrong adapter
may damage your computer. We assume no responsibilities for damages arising from misuse of AC
adapters.
To properly connect the adapter, follow the steps as below:
1. Connect the power cord to the AC adapter.
2. Connect the AC adapter to the DC power port of your computer.
3. Connect the AC adapter power cord to an AC outlet.
1.15 Installing M1028 Device Drivers
If your M1028 M1028 CafeBook Computer already has an operating system installed, it is best to
install all necessary device drivers in order for he hardware to properly function.
