Gigabyte B650 AORUS ELITE AX Скачать руководство пользователя страница 36

- 36 -

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Product Name: 

Motherboard

Trade Name: 

GIGABYTE

Model Number: 

B650 AORUS ELITE AX / B650 AORUS ELITE

Responsible Party – U.S. Contact Information: 

G.B.T. Inc. 

Address: 17358 Railroad street, City Of Industry, CA91748

Tel.: 1-626-854-9338

Internet contact information: https://www.gigabyte.com 

FCC Compliance Statement: 

This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators. 

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this 

device must accept any interference received, including interference that may cause undesired operation.

Antenna use:

In order to comply with FCC RF exposure limits, low gain integrated 

antennas should be located at a minimum distance of 7.9 inches (20 cm) 

or more from the body of all persons.

Explosive Device Proximity Warning

Warning: Do not operate a portable transmitter (such as a wireless network 

device) near unshielded blasting caps or in an explosive environment 

unless the device has been modified to be qualified for such use.

Antenna Warning

The wireless adapter is not designed for use with high-gain antennas.

Use On Aircraft Caution

Caution: Regulations of the FCC and FAA prohibit airborne operation of 

radio-frequency wireless devices because their signals could interfere with 

critical aircraft instruments.

Other Wireless Devices

Safety Notices for Other Devices in the Wireless Network: Refer to the 

documentation supplied with wireless Ethernet adapters or other devices 

in the wireless network.

Canada, Canada-Industry Notice:

 

This device complies with Industry Canada license-exempt RSS 

standard(s). Operation is subject to the following two conditions: 

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that 

may cause undesired operation of the device.

Cet appareil est conforme aux normes Canada d'Industrie de RSS 

permis-exempt. L'utilisation est assujetti aux deux conditions suivantes: 

(1) le dispositif ne doit pas produire de brouillage préjudiciable, et 

(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage 

susceptible de provoquer un fonctionnement indésirable.

Caution:

 When using IEEE 802.11a wireless LAN, this product is restricted 

to indoor use due to its operation in the 5.15-to 5.25-GHz frequency 

range. Industry Canada requires this product to be used indoors for the 

frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for 

harmful interference to co-channel mobile satellite systems. High power 

radar is allocated as the primary user of the 5.25-to 5.35-GHz and 5.65 to 

5.85-GHz bands. These radar stations can cause interference with and/or 

damage to this device. The maximum allowed antenna gain for use with 

this device is 6dBi in order tocomply with the E.I.R.P limit for the 5.25-to 

5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. To 

comply with RF exposure requirements all antennas should be located at a 

minimum distance of 20cm, or the minimum separation distance allowed 

by the module approval, from the body of all persons.

Attention:

 l'utilisation d'un réseau sans fil IEEE802.11a est restreinte à 

une utilisation en intérieur à cause du fonctionnement dansla bande de 

fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit 

utilisé à l'intérieur des bâtiments pour la bande de fréquence 5.15-5.25 

GHz afin de réduire les possibilités d'interférences nuisibles aux canaux 

co-existants des systèmes de transmission satellites. Les radars de 

puissances ont fait l'objet d'une allocation primaire de fréquences dans 

les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent 

créer des interférences avec ce produit et/ou lui être nuisible. Le gain 

d'antenne maximum permissible pour une utilisation avec ce produit est de 

6 dBi afin d'être conforme aux limites de puissance isotropique rayonnée 

équivalente (P.I.R.E.) applicable.

dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement 

point-à-point. Pour se conformer aux conditions d'exposition de RF toutes 

les antennes devraient être localisées à une distance minimum de 20 cm, 

ou la distance de séparation minimum permise par l'approbation du module, 

du corps de toutes les personnes.
Under Industry Canada regulations, this radio transmitter may only operate 

using an antenna of a type and maximum (or lesser) gain approved for 

the transmitter by Industry Canada. To reduce potential radio interference 

to other users, the antenna type and its gain should be chosen so that 

the equivalent isotropically radiated power (e.i.r.p.) is not more than that 

necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur 

radio peut fonctionner avec une antenne d'un type et d'un gain maximal 

(ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le 

but de réduire les risques de brouillage radio électrique à l'intention des 

autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte 

que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas 

l'intensité nécessaire à l'établissement d'une communication satisfaisante.

Regulatory Notices

United States of America, Federal Communications Commission Statement

The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted 

by FCC certified equipment. The Intel PRO/Wireless 5000 LAN products meet the Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/

IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC's 

recommended limits.
The following safety precautions should be observed:

 

Do not touch or move antenna while the unit is transmitting or receiving.

 

Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face 

or eyes, while transmitting.

 

Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged.

 

Use in specific environments:

-  The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments.

-  The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).

-  The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.

Содержание B650 AORUS ELITE AX








































Отзывы: