background image

LCD Monitor User's Manual

4

 -

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions 

from digital apparatus set out in the Radio Interference Regulations of the Canadian 

Department of Communications. This class B digital apparatus complies with 

Canadian ICES-003.

Avis de conformité à la réglementation d’Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

European Union (EU) CE Declaration of Conformity

This device complies with all the requirements and other relevant provisions of 

the Electromagnetic Compatibility Directive (2014/30/EU), Low-voltage Directive 

(2014/35/EU), ErP Directive (2009/125/EC ), RoHS directive (recast) (2011/65/EU).
This product has been tested and found to comply with all essential requirements of 

the Directives.

European Union (EU) RoHS (recast) Directive 2011/65/EU & the European 

Commission Delegated Directive (EU) 2015/863 Statement

GIGABYTE products have not intended to add and safe from hazardous substances 

(Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components 

have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE 

are continuing our efforts to develop products that do not use internationally banned 

toxic chemicals.

European Union (EU) Community Waste Electrical & Electronic Equipment 

(WEEE) Directive Statement

GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU WEEE (Waste 

Electrical and Electronic Equipment) (recast) directive. The WEEE Directive specifies 

the treatment, collection, recycling and disposal of electric and electronic devices and 

their components. Under the Directive, used equipment must be marked, collected 

separately, and disposed of properly.

WEEE Symbol Statement

The symbol shown below is on the product or on its packaging, which 

indicates that this product must not be disposed of with other waste. 

Instead, the device should be taken to the waste collection centers for 

activation of the treatment, collection, recycling and disposal procedure.

.

For more information about where you can drop off your waste equipment for 

recycling, please contact your local government office, your household waste 

disposal service or where you purchased the product for details of environmentally 

safe recycling.

Содержание Aorus KD25F













































Отзывы: