Gigabyte AirCruiser GN-BR404 Скачать руководство пользователя страница 3

Страница: 3 / 109

kitchen sink or laundry tub, in a wet basement or near a swimming pool.

Federal Communications Commission (FCC) Statement

Note:

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

Properly shielded and grounded cables and connectors must be used in order to meet FCC

emission limits. Neither the provider nor the manufacturer are responsible for any radio or

television interference caused by using other than recommended cables and connectors or

by unauthorized changes or modifications to this equipment. Unauthorized changes or

modifications could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter

/ For European users only /

European Community Directive Conformance Statement

This product is in conformity with the protection requirements of EC Council Low Voltage

Directive (Safety) 73/23/EEC, EMC Directive 89/336/EEC on the approximation of the laws

of the Member States relating to electro-magnetic compatibility.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)

during normal operation. Proposed RF exposure safety information to include in User’s

Manual.

Содержание AirCruiser GN-BR404














































































































Результаты поиска

Содержание AirCruiser GN-BR404

Отзывы:

Похожие инструкции для AirCruiser GN-BR404

Бренды по названию

Популярные бренды

Gigabyte AirCruiser GN-BR404, Руководство пользователя

Результаты поиска

Содержание AirCruiser GN-BR404

Отзывы:

Похожие инструкции для AirCruiser GN-BR404

Бренды по названию

Популярные бренды