52
Safety, Care and Regulatory Information
Important safety instructions
Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use.
l
The product should be operated only from the type of power source indicated on the rating label.
l
If your computer has a voltage selector switch, make sure that the switch is in the proper position for your area. The voltage selector switch is set at the factory to the correct voltage.
l
The plug-socket combination must be accessible at all times because it serves as the main disconnecting device.
l
All products hipped with a three-wire electrical grounding-type plug only fits into a grounding -type power outlet. This is a safety feature. The equipment grounding should be in accordance with local and national elec trical codes. The
equipment operates safely when it is used in accordance with its marked electrical ratings and product usage instructions
l
Do not use this product near water or a heat source.
l
Set up the product on a stable work surface or so as to ensure stability of the system.
l
Openings in the case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space around the system for ventilation when you set up your work area. Never insert objects of any kind into t he
ventilation openings.
l
To avoid electrical shock, always unplug all power cables and modem cables from the wall outlets before removing covers.
l
Allow the product to cool before removing covers or touching internal components.
l
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with codes for possible special disposal instructions.
Precautions for Products With Modems, Telecommunications, or Local Area Network Options
Observe the following guidelines when working with options:
•
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
•
CAUTION
- To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
•
Do not plug a modem or telephone cable into the network interface controller (NIC) receptacle.
•
Disconnect the modem cable before opening a product enclosure, touching or installing internal components, or touching an unins ulated modem cable or jack.
•
Do not use a telephone line to report a gas leak while you are in the vicinity of the leak.
•
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a sw imming pool.
Federal Communications Commission (FCC) Statement
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable prot ection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmf ul interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Properly shielded and grounded cable s and connectors must be used in order to meet FCC emission limits. Neither the provider nor the manufacturer are responsible for any radio or television interference caused by using other than recommended cables
and connectors or by unauthorized changes o r modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
/ for European users only /
European Community Directive Conformance Statement
This product is in conformity with the protection requirements of EC Council Low Voltage Directive (Safety) 73/23/EEC, EMC Directive 89/336/EEC on the approximation of the laws of the Member States relating to electro -magnetic compatibility.
• PDF • • • • • • • • • • PDF
http://www.fineprint.com