27
Step 4.
”
LAN Setup
„
is shown in the diagram.
Each setup item of the local area network is
default setting, and is not necessary to make change to it
for normal operation. Please
input the settings on your own if change is needed..
DHCP Setup:
-
„
enable
„
indicates that the DHCP function of the GN-BR401 is initialized, and
will automatically assign an IP address to the computer that is connected to the
LAN end of the GN-BR401. (Configure the DHCP starting address and the
DHCP allocation number on your own.)
-
”
disable
„
indicates that all IP addresses of all the computers connected to the
LAN end of the GN-BR401 LAN. (It is not necessary to configure the DHCP
starting address and the DHCP allocation number.)
DHCP
Starting Address:
:
When the DHCP setting is
”
enable
„
, the GN-BR401 uses this address as the
initial value to assign the IP to the PC connected to the LAN end.
For example, the DHCP starting address is 192.168.1.1
DHCP allocation number is 50.
The IP allocable range of the DHCP is from 192.168.1.1 to 192.168.1.50.
Note:
The LAN IP address
”
192.168.1.254
„
is the default IP address of the
GN-BR401.
Click
”
Next
–
, and the following screen will appear:
• PDF • • • • • • • • • • PDF
http://www.fineprint.com