E
ngl
ish
1
4-5 Connection of Fan Power Cable
This chassis has 1 x 12cm silent blue LED cooling fan at the front and 2 x
12cm silent blue LED fans at the rear. There are internal connectors that
connects the front and rear fans making it into a single 3-pin power con-
nector.
〔
Required Tools: None
〕
4-5.1 Insert the 3-pin connector into
the system fan power connector
on the motherboard.
4-6 Installation of 5.25” Front Device Bay
4-7 Installation of 3.5” Front Device Bay
Installation of 3.5” front device is the same as 5.25” front devices, please
refer to step 4-6.
4-8 Installation of 3.5” Internal Device Bay
This chassis provides a removable/dual directional HDD rack to accommo-
date up to 5 hard disc drives.
〔
Required Tools: Thumbscrews (4 per hard disc drive)
〕
Detach the front
panel (see step 1-3.2
on page 6) and
remove the front
drive rail.
6.1
Remove the
corresponding EMI
plate and attach the
front panel onto the
chassis.
6.2
Secure the 5.25”
device with the
internal latch.
Refer to the figure
for installation
procedure.
6.3
Installation complete
6.4
Slide the HDD into
the rack and secure
the HDD with the
thumbscrews.
8.1
8.2
Lock
1
2