Gigabyte 3D Galaxy II GH-WIU02, Руководство пользователя

Страница: 20 / 24

5-2-3 To accomplish liquid cooling
system, align the 2 screw holes
on the radiator rack to the 2 screw
holes on the power supply and
fasten them up.
With GIGABYTE
™
3D Aurora,
Triton, Poseidon series, water tank
can be placed inside of the chassis.
[use 2 screws (b), please refer to
accessories list]
Velcro could be used to place the
tank while using the chassis other
than 3D Aurora, Triton and Poseidon
series.
While removing the tubes for disassembly, please make sure to keep all
the devices away from any electronic part.
6. Liquid Cooling System Disassembly
Tool needed: Pail, screwdriver
Preparation: Please place the chassis on a table and a pail on the floor.
6-1-2 Remove MOSFET air cooling fan
from the waterblock. 6-1-1 Remove radiator from the rear
of the chassis and lay it on the
table.
(Caution: Do not remove the tube
at this point)
20
En
gl
is
h