1
1. Hardware Descriptions
Panel information:
The front panel is shown as below:
The following table shows the port descriptions.
Label
Description
Console port
Console port with RJ45 connector for connection to a computer for
console control /administration.
The Console port can be used for accessing the OnAccess4200 CLI
(command line interface) for out-of-band management.
Monitor port (MON)
1*10/100/1000BaseT local system provision/monitoring port
G1/G2
2*1GE Ethernet ports for uplink aggregation
XG1/XG2
2*10GE SFP+ Ethernet ports for uplink aggregation
G.hn1~4
G.hn ports for data signal and Phone signal
Master/slave switch
Select master or slave mode
SYNC
Clock SYNC
100~240 V AC INPUT
Connects to AC power supply:100-240VAC 50-60 Hz
Power switch
Open or shut off the power supply
GND
One optional threaded common ground connection.
The following table shows the LED descriptions.
Label
Type
Color
State
Description
PWR
A/B
Power status
Yellow
On
The power is on and supplying the current to
the system
Off
The power is off or it is not supplying the
current to the system
SYS
System status
Green
On
System is started
Off
System does not start
(1*10/100/1000BaseT RJ45)
Ethernet port
(2*GE/10GE SFP/SFP+)
