GIGA-TMS PROMAG TR610 страница 40 Скачать руководство пользователя | Manualshive

Страница: 40 / 69

background image

TR610 User's Manual

40

© 2010 GIGA-TMS Inc.

3.3

AggreGate Integration

Tibbo AggreGate is a complete device management solution that allows you to combine multiple
terminals into a large system which can be administered as an integrated whole. At the heart of
AggreGate is a powerful server, allowing multiple operators to access and work with multiple terminals at
the same time.

AggreGate Time and Attendance is a specialized version of AggreGate. The system may be easily
adapted to the attendance control standards of different countries. Advanced multi-level organization
structure and employee management along with different types of shifts allow providing a centralized
attendance control for large organizations with multiple branches and departments. Scalable system
architecture is designed to perform well for installations with hundreds of employees and multiple
entrance gates.

The TR610 seamlessly interfaces with AggreGate. Once you set up the terminal to connect to
AggreGate, it will continuously transmit log events to AggreGate as they are generated. You can read
more about AggreGate Time and Attendance at

http://aggregate.tibbo.com/solutions/time-attendance.

, and look at its detailed technical documentation at

http://aggregate.tibbo.com/docs/

time_and_attendance.htm

Working with AggreGate falls outside the scope of this manual. It is an extensive, complex system,
which has its own documentation, including tutorials, at

http://aggregate.tibbo.com/docs/

not sure what AggreGate is all about, go ahead and find out. The system is free to download and try.

The rest of this article assumes prior knowledge of AggreGate, and only serves as a short walk-through
showing how to quickly set up your TR610 for working with AggreGate.

There are two main ways to connect the TR610 to AggreGate, with basic steps common to both ways.

The Common Steps

1. Configure the IP address and other network settings of TR610 as described

. Make sure they

work by testing the

.

2. Get and install AggreGate LinkServer and AggreGate Client from

http://aggregate.tibbo.com

you install LinkServer, make sure AggreGate Time and Attendance is marked.

15

22

«
...
38
39
40
41
42
...
»

Содержание PROMAG TR610






































































Отзывы:

Нет отзывов

Похожие инструкции для PROMAG TR610

Бренд: Hama Страницы: 10

Бренд: Hama Страницы: 7

Бренд: La Crosse Technology Страницы: 6

Бренд: La Crosse Technology Страницы: 8

Бренд: La Crosse Страницы: 5

Бренд: La Crosse Technology Страницы: 4

Бренд: La Crosse Technology Страницы: 8

Бренд: La Crosse Technology Страницы: 7

Бренд: Sentry Страницы: 2

Бренд: Laser Страницы: 8

Бренд: La Crosse Technology Страницы: 2

Бренд: Lindy Страницы: 1

Бренд: Craig Страницы: 9

Бренд: Nextime Страницы: 7

Бренд: Equity Страницы: 4

Бренд: Venturer Страницы: 12

DREAM MACHINE ICF-CD855

Бренд: Sony Страницы: 7

DREAM MACHINE ICF-C793

Бренд: Sony Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды