6.
Installation
Variant 1 – „Point-to-Point “: one master and client
Variant 2 – Connection to the Switch G4224T or G4200-8T/4T
7.
Connection type and wire assignment on device (RJ45 plug)
The G.hn connection can be established either via one wire pair (connection type SISO = G.hn profile “PHONE 200MHz”) or
via two wire pairs (connection type MIMO = G.hn profile “PHONE 100MHz MIMO”). The connection type must be
configured via web interface in both modems or via the G.hn switch.
The default setting is one wire pair connection (“PHONE 200MHz”).
Wire assignment SISO
Wire assignment MIMO