&
ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to
Enabled
, the following functions will become unavailable: Resume by Alarm,
power on by mouse, and power on by keyboard.
&
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
&
Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
&
Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to
Enabled
.
Auto
lets the BIOS automatically configure this
setting. (Default: Auto)
&
RC6(Render Standby)
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
consumption. (Default: Enabled)
&
AC BACK
Determines the state of the system after the return of power from an AC power loss.
Memory
The system returns to its last known awake state upon the return of the AC power.
Always On
The system is turned on upon the return of the AC power.
Always Off
The system stays off upon the return of the AC power. (Default)
IO Ports
&
Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGFX
(Note)
Sets the onboard graphics as the first display.
PCIe 1 Slot
Sets the graphics card on the PCIEX16 slot as the first display. (Default)
This item is configurable only when
CSM Support
is set to
Enabled
.
&
Internal Graphics
Enables or disables the onboard graphics function. (Default: Auto)
&
DVMT Pre-Allocated
Allows you to set the onboard graphics memory size. (Default: 64M)
&
DVMT Total Gfx Mem
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: 256M)
&
Aperture Size
Allows you to set the maximum amount of system memory that can be allocated to the graphics card.
Options are: 128MB, 256MB, 512MB, 1024MB, and 2048MB. (Default: 256MB)
(Note) This item is present only when you install a CPU that supports this feature.
- 29 -
