GIGA-BYTE TECHNOLOGY H510M S2, Руководство пользователя

Страница: 15 / 40

7) M2A_SB (M.2 Socket 3 Connector)
The M.2 connector supports M.2 SATA SSDs or M.2 PCIe SSDs.
Select the proper hole for the M.2 SSD to be installed and refasten the screw and standoff.
Installation Notices for the M.2 and SATA Connectors:
The availability of the SATA connectors may be affected by the type of device installed in the M2A_SB
sockets. The M2A_SB connector shares bandwidth with the SATA3 3 connector. Refer to the following
table for details.
SATA3 0 SATA3 1 SATA3 2 SATA3 3
M.2 SATA SSD
a a a r
M.2 PCIe SSD
a a a a
No M.2 SSD Installed
a a a a
a
: Available,
r
: Not available
Connector
Type of
M.2 SSD
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Locate the proper mounting hole for the M.2 SSD to be installed and then install the mounting clip first.
Step 2:
Slide the M.2 SSD into the connector at an angle.
Step 3:
Press the M.2 SSD down and then secure it by pressing the clip pin into the mounting hole.
F_USB30
F_ U
B_
F_ F_
_
B
B S_
B
S B_
B
_ S
S_
_
B
_ U
_
B
S
12
3
12 3
12
3
1 2 3
1
1
1
1
B S S
S
_S
S S U
1 2 3
S 3
B S S S
U
_ _ 3
F_USB3 F
S _
S _
S _
S F
B_
B_
F
_ 0
S
S
_ 0 F
_ F
_
_
_ _B
U
S _S
_
S F_
B
USB 0_ B
B_
B_
F_USB3 F_USB30 3
_
_3 U
S _
M2A_SB
80 60 110
8) BAT (Battery)
The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low
level, or the CMOS values may not be accurate or may be lost.
You may clear the CMOS values by removing the battery:
1. Turn off your computer and unplug the power cord.
2. Gently remove the battery from the battery holder and wait for one minute. (Or use a
metal object like a screwdriver to touch the positive and negative terminals of the battery
holder, making them short for 5 seconds.)
3. Replace the battery.
4. Plug in the power cord and restart your computer.
• Always turn off your computer and unplug the power cord before replacing the battery.
•
Replace the battery with an equivalent one. Damage to your devices may occur if the battery is
replaced with an incorrect model.
• Contact the place of purchase or local dealer if you are not able to replace the battery by yourself
or uncertain about the battery model.
•
When installing the battery, note the orientation of the positive side (+) and the negative side (-)
of the battery (the positive side should face up).
• Used batteries must be handled in accordance with local environmental regulations.
- 15 -