background image

- 32 -

2-5 Peripherals

 

&

Intel Platform Trust Technology (PTT)

 

Enables or disables Intel

®

 PTT Technology. (Default: Disabled)

 

&

Initial Display Output

 

Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard 

graphics.

 

IGFX   

 

Sets the onboard graphics as the first display.

 

PCIe 1 Slot  

Sets the graphics card on the PCIEX4 slot as the first display. (Default)

 

&

OnBoard LAN Controller

 

Enables or disables the onboard LAN function. (Default: Enabled)

 

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to 

Disabled

.

 

&

Legacy USB Support

 

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

 

&

XHCI Hand-off

 

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off 

support. (Default: Disabled)

 

&

Port 60/64 Emulation

 

Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support 

for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. 

(Default: Enabled)

 

&

USB Mass Storage Driver Support

 

Enables or disables support for USB storage devices. (Default: Enabled)

 

&

USB Storage Devices

 

Displays a list of connected USB mass storage devices. This item appears only when a USB storage device 

is installed.

Содержание GA-H110TN-E










































Отзывы: