- 26 -
&
Memory Timing Mode
Manual
and
Advanced Manual
allows the
Memory Multiplier Tweaker
,
Channel Interleaving
,
Rank
Interleaving
, and memory timing settings below to be configurable. Options are: Auto (default), Manual,
Advanced Manual.
&
Profile DDR Voltage
Displays the memory voltage.
&
Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
&
Channel Interleaving
Enables or disables memory channel interleaving.
Enabled
allows the system to simultaneously access
different channels of the memory to increase memory performance and stability.
Auto
lets the BIOS
automatically configure this setting. (Default: Auto)
&
Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability.
Auto
lets the BIOS automatically
configure this setting. (Default: Auto)
`
IMC Timing Settings
This sub-menu provides options for tuning memory compatibility and stability.
`
Channel A/B Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. The respective timing setting
screens are configurable only when
Memory Timing Mode
is set to
Manual
or
Advanced Manual
. Note: Your
system may become unstable or fail to boot after you make changes on the memory timings. If this occurs,
please reset the board to default values by loading optimized defaults or clearing the CMOS values.
`
PC Health Status
&
Reset Case Open Status
Disabled
Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled
Clears the record of previous chassis intrusion status and the
Case Open
field will
show "No" at next boot.
&
Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set
Reset Case Open Status
to
Enabled
, save the settings to
the CMOS, and then restart your system.
&
CPU Vcore/CPU VCCSA/DRAM Channel A/B V3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
&
CPU/System Temperature
Displays current CPU/system temperature.
&
CPU/System Fan Speed
Displays current CPU/system fan speeds.
&
CPU/System Temperature Warning
Sets the warning threshold for CPU/system temperature. When temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
&
CPU/System Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connection when this occurs. (Default: Disabled)