GIGA-BYTE TECHNOLOGY GA-F2A55M-S1, Руководство пользователя

Страница: 28 / 31

- 28 -
C-1. UEFI RAID Coniguration
This mode supports Windows 8 64-bit installation only.
Create a RAID Array
Step 1:
In BIOS Setup, go to
BIOS Features and set OS Type to Windows 8 and CSM Support to Never . Save the
changes and exit BIOS Setup.
Step 2:
Restart your computer and press <F12> to enter the boot device coniguration menu. Use the up or down
arrow key to select UEFI: Built-in EFI Shell . Press <Enter> to access. Follow the steps below and enter the
commands to access the RAID setup utility.
1. Enter
drvcfg at Shell and press <Enter>:
Shell> drvcfg
2. When Drv [XX] Ctrl [XX] Lang [eng] appears, enter the following commands at Shell again:
Shell> drvcfg -s XX XX
XX s are the values shown in the brackets after Drv and Ctrl above, which may vary by hard drives.
Then press <Enter> to enter the RAID setup utility.
Step 3:
The
Main Menu
is the irst screen when you enter the BIOS RAID Setup utility. Use the up or down arrow key
to select Logical Drive Main Menu and press <Enter>.
Step 4:
To create an array, press <Enter> on
Logical Drive Create Menu .
Step 5:
Usable hard drives are listed on the
Logical Drive Create Menu . Use the up or down arrow key to select the
hard drive to be included in the array and press the <Space> key. The selected hard drives will be marked with
[X] . Then move to Basic Setting and press <Enter>.
Step 6:
Use the up or down arrow key to move to and conigure each required item in sequence.
After completing, press <Enter> on Start To Create . When the message "Are You Sure To Create Logical Drive?"
appears, press <Enter> to begin creating the RAID array or <Esc> to cancel.
When completed, a message which says "Successful To Create Logical Drive" will appear. Press <Enter> to
complete. Press <F10> to exit the RAID setup utility.
Delete an Array
To delete an array, select Logical Drive Delete Menu on the Logical Drive Main Menu and press <Enter> to
access. Then press <Enter> on Start To Delete . When the message "Are You Sure To Delete Logical Drive?"
appears, press <Enter> to delete or <Esc> to cancel.
C-2. Coniguring Legacy RAID ROM
Enter the RAID BIOS setup utility to conigure a RAID array. After the POST memory test begins and before
the operating system boot begins, look for a message which says "Press <Ctrl-F> to enter RAID Option ROM
Utility". Press <Ctrl> + <F> to enter the RAID BIOS setup utility. The
Main Menu
is the irst screen when you
enter the BIOS RAID Setup utility. To create a new array, press <2> to enter the
LD View/LD Deine Menu
window. To create an array, press <Ctrl> + <C> to access the
LD Deine Menu
. In the
LD Deine Menu
, use
the up or down arrow key to move to an item for further coniguration. In the following procedure, we'll create
RAID 0 as an example.