5) CPU_OPT (Water Cooling CPU Fan Header)
The fan header is 4-pin and possesses a foolproof insertion design. Most fan headers possess a foolproof
insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black
connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control
design.
DEBUG PO
RT
G.QBOFM
1
Pin No.
Definition
1
GND
2
Voltage Speed Control
3
Sense
4
PWM Speed Control
3/4) CPU_FAN/SYS_FAN1/2/3 (Fan Headers)
All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.
When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is
the ground wire). The speed control function requires the use of a fan with fan speed control design. For
optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.
•
Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
•
These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
CPU_FAN/SYS_FAN1
SYS_FAN3
SYS_FAN2
DEBUG
PORT
G.QBOFM
1
DEBUG PO
RT
G.QBOFM
1
DEBUG
PORT
G.QBOFM
1
Pin No.
Definition
1
GND
2
Voltage Speed Control
3
Sense
4
PWM Speed Control
6) D_LED1/D_LED2 (Addressable LED Strip Headers)
The headers can be used to connect a standard 5050 addressable LED strip, with maximum power rating
of 5A (5V) and maximum number of 1000 LEDs.
Pin No.
Definition
1
V (5V)
2
Data
3
No Pin
4
GND
1
1
F_USB30
F_U
B_
F_
F_
_ B
BS_ B
SB_ B
_S
S_ _ B
_U _ B
S
12
3
12
3
1 2 3
12
3
1
1
1
1
BSS
S
_S
SSU
1
2
3
S3
BSSS
U
__
3
F_USB3F
S
_
S
_
S
_
SF
B_
B_
F
_0
S S
_0F
_F
_
_
__B
U
S
_S
_
SF_
B
USB0_B
B_
B_
F_USB3
F_USB303
_
_3U
S_
F_USB30
F_U
B_
F_
F_
_
B
BS_
B
SB_
B
_S
S_
_
B
_U
_
B
S
1 2 3
12
3
12
3
12
3
1
1
1
1
BSS
S
_S
SSU
1
2
3
S3
BSSS
U
__
3
F_USB3F
S
_
S
_
S
_
SF
B_
B_
F
_0
S
S
_0F
_F
_
_
__B
U
S
_S
_
SF_
B
USB0_B
B_
B_
F_USB3
F_USB303
_
_3U
S_
D_LED1
D_LED2
Connect your addressable LED strip to the header. The power pin
(marked with a triangle on the plug) of the LED strip must be connected
to Pin 1 of the addressable LED strip header. Incorrect connection may
lead to the damage of the LED strip.
Addressable
LED Strip
1
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of
GIGABYTE's website.
- 14 -
