PIAZZETTA Unterfloor distributor system
Page 8 / 14
Created
01.01.2015
ando
Modified
21.01.2021
roen
Object-ID
1874176
Carefully lay the PIAZZETTA down on its side manually
and set it upright with the cover facing upwards.
Screw in the enclosed M8 eye bolts. Attach to a crane
and lift.
Lay the junction box on the ground beside the frame and
insert the main supply cable as far as possible, so that
the loop in the pit is as short as possible. Then connect
the cable and screw up the cover (not required for direct
connection).
Secure the connecting cable from the junction box on
the PIAZZETTA to prevent it from sliding back into the
pit. Lower the junction box into the pit as shown in the
picture and attach to the 2 brackets with M8x16
countersunk screws (not required for direct connection).
