PIAZZETTA Unterfloor distributor system
Page 11 / 14
Created
01.01.2015
ando
Modified
21.01.2021
roen
Object-ID
1874176
Caution
Do not overfill the cover!
The surroundings must not sink!
The transport and vibration of the paving in the area of the underfloor distributor system can cause the screw
connections to loosen. It is therefore essential to check all screw connections before commissioning and
tighten them up if required.
The underfloor distributor system must be cleaned immediately after being grouted into its surroundings.
Cleaning is also required if the grout has to be renewed.
3.4 Connecting underfloor distributor to power supply
Hint
In the case of underfloor distributor systems with fresh water, the junction box must be attached to the side
facing away from the water tap point!
Caution
The electrical connection may only be made by trained personnel and is the responsibility of the operator.
Testing of the PIAZZETTA as per the following inspection plan.
Hint
It is recommended that junction boxes at critical locations are filled with BLUE GEL.
(Article 166534 [1l] / Article 174063 [2l] / Article 172210 [10l])
