Floor socket outlets FONTO
Page 5 / 18
Created
12.12.2016
KHSH
Modified
08.07.2020
roen
Object-ID
1144626
2.3 Installation conditions
GIFAS-ELECTRIC GmbH accepts no liability in cases where the product has been used inappropriately or not
as intended. The selection and use of the product are the exclusive responsibility of the individual operator.
Product liability claims, warranties also as guarantees made by GIFAS-ELECTRIC GmbH with respect to the
product are voided, if it is not used, serviced or maintained in accordance with the instructions in this manual.
Hint
To ensure permanent tightness and function of the floor outlets following points should be noted:
-
For the assembly of the floor socket, a fixed base must be present. A montage of floor socket in lots
soil (gravel, sand, ...) is not allowed.
-
The cable glands must be suitable for the particular cable diameter.
-
Before closing the floor socket remove all pollution.
-
The floor sockets must be cleaned regularly from dirt. All seals should be checked for damage and
must be greased when needed.
-
If the floor sockets are installed in floors with floor heating or in places with temperature fluctuations
(cold circulating air), condensation water may form. This can be remedied if the socket is regularly
ventilated or operated with an attachment ring fitted.
-
All cable glands must comply with protection class IP68.
-
Water must be prevented from entering the housing.
