GiBiDi AS07000, Инструкция по установке

Страница: 8 / 24

8 SR2
UK
Type
Control unit
Power feed
Outlet blinking light
Motor outlet
Radio receiver
Aux. power-feed outlet
Storable radio codes
Box dimensions
Container
Operating temperature
Single-phase electronic control unit
for the automation of rolling shutters
with on-board radio receiver
230 VAC 50-60Hz (5A Fuse)
230 Vac 40 W
230 Vac 1350 W max (relè 16A)
433.92 MHz rolling code
24 Vca 3 W max
25
80 x 120 x 50 mm
ABS V-0 (IP55)
-20 ÷ 70 °C
SR2
The manufacturer reserves the right to introduce modifications without prior notice; the manufacturer
does not bear any responsibility for damage or injury caused by improper use or wrong installation.
Before installing and programming the control unit, carefully read this instruction manual.
IMPORTANT NOTICE
• This instruction manual shall only be used by technical staff specialized in automation installation.
• No information contained herein may be of interest to final users.
• All maintenance or programming operation shall only be performed by skilled technical staff.
• AUTOMATION SHALL BE PERFORMED IN ACCORDANCE WITH CURRENT EUROPEAN STANDARDS:
-
EN 60204-1
(Safety of Machinery, electrical equipments of machines, part 1: general rules).
-
EN 12445
(Safety in use of power operated doors - testing methods).
-
EN 12453
(Safety in use of power operated doors - requirements).
K3
T1
D1
IC1
C5
C3
R1 R4
D2
R3
C6
R2
R7
MOD1
S2
C7
J1
IC3
CN1
IC5
IC4
M2
ANTENNA
R5 R8
IC2
K2
K1
F1
M1
IN OUT
220Vac 2AVAc START FOTOC
ANT
OPEN CLOSE LAMP
M
S1
C1A C2
C4
C1 C2A
SEL SET
R6 DIP-3
O
N