16
VPC2000 Series Vehicle PC Installation Manual ver B.0
2.4.3.1 Connector A
There are USB connectors x 2, Power pins, VGA, Audio (Right/Left) Output.
External USB port x 2
The VPC2000 series provide 3 x external USB port for connecting other USB devices
within Multi-Lock connector, which gives completed Plug & Play and hot swapping for
external devices.
The USB port interface complies with USB2.0 compliant. The USB interfaces can be
disabling from the system BIOS setup
Power pin to Battery
The power input connector carries out from 9~30 VDC external power input.
With yellow Battery line and black line to ground.
Power pin to ACC
The RED line is connecting to ACC ignition; the ground line needs to connect to car body.
VGA 1
It provides a high resolution VGA interface with a D-sub 15-pin connector to support a
VGA monitor and supports VGA up to 1600 x 1200 @ 85Hz resolution and up to 64MB
shared memory.
The VPC2000 series’ VGA interface can drive a conventional display. It has one
connector to support display which is for standard CRT VGA monitors.
