8
Step 18
：
After calibration is completed. Press
to save the setting.
CAUTION: The calibration is completed when the “Calibrate” value shows 0. A calibrated value of -1
indicates the calibration has failed.
Maintenance and cleaning
To ensure the functionalities of Giant Power Pro and not to affect the Giant limited warranty, please make
sure to comply with the WARNINGS and CAUTIONS listed below. Not complying with these recommendations
may result in damage to Giant Power Pro and void your warranty.
Warning: Only to clean the covers of the Giant Power Pro. Please do NOT disassemble the Giant Power
Pro this will void your warranty.
Warning: Please only clean the cover of Giant Power Pro with a clean cloth and water. Please do NOT use
corrosive detergent to clean as it may damage the cover.
Warning: Do NOT use the high pressure washers to clean the power meter directly. The high pressure
will cause the moisture to permeate the internals of the power meter and damage the electronic components.
Warning: Please do NOT expose the power meter to constant high temperatures.
CAUTION: The storage environment temperature range is between -20°C ~ 70°C / -4°F ~ 158°F. Damage
to the electronic components may occur if the storage temperature is out of range.
CAUTION: The operating environment temperature range is between -10°C ~ 50°C / 14°F ~ 122°F. The
functions may not be normal when the temperature is out of range.
Step 16
Step 17
Step 18
