- Pag. 4. -
2.
Mounting the brake system on the bicycle
2.1
Assembly of rotor
Place the rotor on the hub flange taking care that
the arrows on the internal part of the rotor are
pointing in the direction of rotation of the wheel.
Mount the rotor with the six M5 bolts onto the hub
with a T25 Torx key to a torque of 4 Nm.
Tighten the bolts in a crossed pattern.
Threads of new bolts have been coated with blue
material that prevents that bolts come loose.
Always use Loctite
TM
Primer (#7649) and
Loctite
TM
blue Removable Threadlock (#242) or
similar material on thread of these bolts during
re-assembly.
Then install the wheel into the frame / front fork
with the rotor at the left hand side and fix the
wheel in the dropouts.
Warning!
It is essential that the disc is clean (free from grease or oil residues) to avoid contaminating
the brake pads and to insure perfect braking.
Grease can be removed from the rotors with
a citrus based cleaner.
