CITYSTORM SERVICE INSTRUCTION
2
Stem watch
■
How to use stem watch?
Method of displaying the date:
Press the button A to display the DATE.
Method to display the time:
Press the button A twice to display the time.
Method of setting:
Step1: Press the button B twice to enter setting mode.
Step2: Press the button A to change the value.
Step3: Press the button B to confirm the setting and
move to the next digit to be set.
Step4: Set each digit in order from date to time.
Step5: After the minutes have been set, press button A
to return to normal display.
■
How to replace the battery?
Loosen the stem watch fixing bolt
with 3mm Allen key.
Tightening torque: 1.9-3.4Nm
Step 1
:
Push the stem watch up with
3mm Allen key.
Step 2
:
Bolt
Loosen the cover fixing screw
with screwdriver.
Step 3
:
Replace the battery (LR921) with
a new one.
Step 4
:
A
B
A: SET
B: MODE
CAUTION
The battery has polarity (+/- sides), so
be sure to install the battery with the + side upward as
shown in the diagram.
!
Loosen the rear light fixing bolt
with 4mm Allen key.
Remove the rear light and fixing
link.
Install onto saddle IN THE
FOLLOWING ORDER: one
rear light, one fixing bolt.
Tighten the rear light fixing bolt
with 4mm Allen key.
Tightening torque:2.9-5.8Nm
Step 1
:
Step 1
:
Step 2
:
Rear light
■
How to replace the battery
Replace with new battery
(SIZE AAA).
Step 2
:
■
How to install the rear light onto saddle
-
+
-
CAUTION
The battery has polarity (+/- sides), so
be sure to install the battery as shown in the diagram.
!
Fixing link
+
Fixing bolt
Take out the cover with coin.
