Giant B92X, Руководство пользователя

Страница: 6 / 21

深 圳 市 瀚 威 隆 科 技 有 限 公 司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 6 / 21
www.harvilon.com
WAN WAN Port (RJ45) Connect to the WAN device, data
exchange with the internet
Button(Will adjust with the specific mode)
Button Description Function
REST/WPS
REST/WPS
Multi-function button
Rest: Press for 8 seconds
WPS: Press one times.
Antenna 2* 5Dbi omni antenna
Wireless data transfer and
receive

2.2 Rest
If you want to rest to the factory default settings, please refer the below steps
1) To plug the power adapter.
2) When the router works normally, press the REST/WPS button for 8 seconds.
3) All the router’s LEDs will off and then on again, wait until it work normally.
4) When above 3 steps done, the router will rest to the factory default setting.
Warning:
Before steps finishing, don’t cut the power off, or it will break your router.

2.3 System Requirements.

Network card and Ethernet cable

TCP/TP net software (Windows 95 or higher version has pre-install)

IE 5.0 or higher version

2.4 Install Condition
When you install the router, please refer the below

Put the device horizontally

Keep away from any heat device

Do not put it in some place which is too dirty or too humidity.
Remark :
The environment will effect the transfer distance , recommend using environment:
Temperature:
0
℃
~40
℃
, Humidity : 10%~95% RH
3. TCP/IP Configuration
Before using the device, you need to configure the network correctly, this manual is based
on the Windows 2000/XP, the IP of the device is 192.168.1.1 , subnet mask is 255.255.255.0 .
Firstly, connect your PC to the LAN port, and then you can configure the IP of your PC in 2
ways.

Set the IP
Set your PC’s IP as 192.168.1.xxx(xxx could be any number in 2~254), subnet mask